> ## Documentation Index
> Fetch the complete documentation index at: https://help.yournewdoor.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Work with openings

> Add lines to each door opening, change quantities and check each opening's total.

When the job has doors, the estimate builder shows an **Openings** panel on the left (above the steps on a phone). Each opening is one door location on the job, and every line you add goes on whichever opening is selected.

* **Opening 1** is ready when you start, so you can add items right away.
* Each row shows a picture of the chosen door, the opening's number and name, its configuration and size (or **Config & size not set**), and the chosen door with its price (or **Not selected**). Until a door is picked, the picture spot shows a plain gray tile.
* Click **+ Add opening** to add another. An estimate can have up to 20 openings.
* Use an opening's **⋮** menu to **Rename**, **Move up**, **Move down** or **Delete** it.
* **Grand total** at the bottom adds up every opening.

## + Add opening stays on screen

On the **Products**, **Hardware**, **Labor**, **Necessary components** and **Estimate** steps, **+ Add opening** and the **Grand total** stay pinned to the bottom of the Openings panel, so you never have to scroll to the end of the catalog to reach them.

* The catalog scrolls on its own, next to the panel. The page itself doesn't scroll.
* A long list of openings scrolls inside the panel, above **+ Add opening**.
* On the **Estimate** step, the photos, notices and step tabs scroll with the catalog, so they never push **+ Add opening** off screen.
* On a phone, the Openings panel sits above the catalog at a fixed height, with **+ Add opening** at its bottom.
* When you print, the whole page prints as usual.

> [!TIP]
>
> Select the opening first, then add doors, labor, components and hardware. Lines stay on the opening that was active when you added them, even if you change the quantity later.

## Opening blocks on the Estimate step

On the **Estimate** step, each opening gets its own block. The heading shows the opening's number and name, and its **Opening subtotal** on the right. Inside, lines are sorted into six sections, always in this order:

| Section | What goes here |
| - | - |
| **Doors** | The doors on this opening. |
| **Inserts & unit components** | Inserts, casings, panel locks and other unit add-ons. |
| **Labor & service** | Install and service labor. |
| **Finishing** | Labor items in the Finishing category. |
| **Hardware & Trim** | Hardware for this opening. |
| **Necessary components** | Required components. |

A section with nothing in it still shows, with a short note such as **No doors sent to this opening yet.** or **No install labor on this opening.** Each section has a link to fill it in, like **Pick doors →**, **Add labor →** or **Add hardware →** (it reads **Add / change doors →** or **Edit labor →** once there are lines). The link selects that opening and jumps you to the right step, so whatever you add lands on it.

The footer of each block breaks the opening down by **Door**, **Inserts & components**, **Labor**, **Finishing**, **Hardware & trim**, **Components** and, when there are any, **Repair**, followed by the opening's total.

> [!NOTE]
>
> If your role can't see prices, every block keeps the same layout, and the amounts show **Hidden for your role** instead of a number.

## Change quantity on catalog lines

Every priced catalog line you add on the door-expert estimate (`/catalog/pricebook/estimate`) has **+** and **−** quantity controls. Quantity moves in half-steps, so you can set values like **0.5**, **1**, **1.5** or **2.5**.

This applies to:

* Doors
* Labor
* Jamb kits, paint and other necessary-component lines

How quantity behaves:

* Adding the **same** door (or the same catalog item) again bumps that line's quantity instead of creating a second line.
* Adding **two different** doors keeps both lines on the estimate, and **both** count toward the total.
* The line total is unit price × quantity. The **Grand total**, opening subtotals and price sidebar all update as you change quantity.
* Quantities save with the estimate version and show on the [customer proposal](https://help.yournewdoor.com/proposals/line-items-and-discount.md#catalog-line-quantities-on-the-proposal) with the same fractional qty.

Hardware add-on quantity stays **integer-only** (whole numbers). Free-text manual lines use their own qty field on the Estimate step. See [Manual lines and hardware add-ons](https://help.yournewdoor.com/estimates/manual-lines-and-add-ons.md).

The adjacent **+** and **−** buttons are outline controls that match the other Field Ops outline buttons (same height, padding, corner radius and type size). Only color or fill shows which control is primary elsewhere on the screen.

> [!TIP]
>
> Use **0.5** when you only need half a can of paint or a partial labor unit. Step with **+** / **−**; you don't type the number.

## Gray out a line

Every line in an opening block has a **Gray out** button. Graying a line out keeps it on the estimate so the customer can still see it, but drops it from every total. The row fades, its name is struck through, and the button changes to **Count it**. Click **Count it** to put the line back in the total.

Grayed-out lines are saved with the estimate, so they stay grayed out when you reopen it. They're left out of the opening subtotal, the **Grand total**, the price sidebar, the estimate totals in the Sales Kanban flyout and the published proposal, so all of those show the same number.

**Gray out** is also how you drop an unused door option from the total when more than one door is on the opening. Both doors stay visible; only a grayed-out door is left out of the money.

> [!TIP]
>
> Use **Gray out** for options the customer passed on, like an upgrade they don't want right now, instead of deleting the line.

## Pick the opening photo door

When you've added more than one door to the same opening (for example after [comparing doors](https://help.yournewdoor.com/estimates/compare-doors.md)), each door row in the **Doors** section gets a round selector. The door you select is the one used for the opening's photo and highlight. **every non-grayed-out door still counts toward the total**. The selector doesn't remove other doors from the money. Use [Gray out a line](#gray-out-a-line) to leave an unused option out of the total.

Click another door's selector to switch which door is highlighted for the opening photo. Older estimates that have several doors and no door picked start with the first door selected.

## This opening total

The price sidebar on the right stays in view as you scroll. At the top it shows **This opening**, with the selected opening's name and its total, so you can see what the current opening costs while you work. Below that are the estimate total and the payment options. Grayed-out lines aren't counted anywhere in the sidebar. If your role can't see prices, the amounts show **Hidden for your role**.

Each line has a small picture next to it: doors and hardware show their product photo, while labor, components, repairs and anything without a catalog photo show a plain gray tile. To fix a line that landed on the wrong opening, use its **Move…** menu. Lines without an opening show under **Unassigned**, and each one has a **Pick opening…** menu so you can put it on the right opening. If the estimate has two or more openings, you'll need to assign those before you can publish.

Your openings are saved with the opportunity, so they're still there when you come back. If a save fails, you'll see **Couldn't save openings. Try again.**

> [!NOTE]
>
> The Openings panel doesn't appear in the repair lane.

The payment option you pick is carried onto the proposal. When the customer opens their proposal link, that option is already selected.

## Next

> [card] [Add manual lines and hardware add-ons](https://help.yournewdoor.com/estimates/manual-lines-and-add-ons.md)
>
> Add a line that isn't in the price book, or a hardware add-on.

> [card] [Price book: all tasks](https://help.yournewdoor.com/guides/price-book-estimates.md)
>
> Every task for this area.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.