> ## Documentation Index
> Fetch the complete documentation index at: https://help.yournewdoor.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configurator and Imagine

> Save door designs to the right customer, fill an opening from a phone photo, and star an Imagine panel as the proposal hero.

The **Configurator** is where you build a door opening (size, shape, zones, sidelites, transom). **Imagine** turns a design into a board of rendered panels you can save and use on a proposal. This page covers how saving works, how to fill an opening from a photo, and how to pick the proposal hero image.

> [!NOTE]
>
> Imagine is for Door Experts, Design Concierges, managers, executives, PMs, admins and dispatchers. CSRs, installers, techs and assessors can't open it.

## Saves stay with the customer

Open the Configurator from a customer (for example **Open configurator** on the customer's Designs page) so the customer shows in the header. Everything you save is then filed under that customer.

| Button | Where it goes | Link after saving |
| - | - | - |
| **Save to Designs** | The customer's **Designs** library | **Designs**, opens that customer's Designs |
| **Save inspiration** | The customer's **Inspirations** library (and the opportunity, if you came from one). It also shows in Designs. | **Inspirations**, opens that customer's Inspirations |
| **Discard** | Nothing is saved | Takes you back to that customer's Designs |

After a save, the line under the drawing reads **Saved "\[name]" to Designs** or **Saved inspiration "\[name]"**, followed by the link. Click it to see the saved design.

> [!WARNING]
>
> Designs and Inspirations are still saved in the browser you used. You'll see them on the same computer or phone and browser, but not on another device or for a teammate.

## Fill an opening from a phone photo

You can drop a photo of the opening and let Field Ops fill in the opening's size and shape.

**1. Open the Configurator for the customer**

Make sure the customer's name shows in the header.

**2. Add the photo**

Under **Customer assets**, drop a photo on **Drop opening photo**, or click it (or **Extract Opening**) to pick one. Photos straight from your phone are fine. Field Ops shrinks them before uploading. You can remove Customer assets chips from the session list, and in Imagine you can remove customer assets from the assets panel (home photo, AI renders, home-photo step, and a generated panel image on the board).

**3. Check the result**

When it works, you'll see **Opening applied from photo.** and the opening on the right updates. Check the numbers before you save.

If something goes wrong, you get a clear message and your design is left as it was:

* **"Couldn't read that photo. Your design wasn't changed — try another photo."** Try a clearer photo of the opening.
* **"That photo is too large to read. Try a smaller photo (under 4 MB)."** Use a smaller photo.

## Star a panel to make it the proposal hero

The proposal's hero is the main image the customer sees. You pick it in Imagine by starring a panel.

> [!NOTE]
>
> A hero is optional. You can mark a proposal ready and send it without one. See [Before you send: the readiness page](https://help.yournewdoor.com/proposals/send.md).

**1. Open Imagine from the proposal**

In the proposal Workbench, go to the **Hero visualization** card and click **Open Imagine**. This tells Imagine which proposal to update.

**2. Star the panel you want**

Once a panel has finished rendering, click its star (**Star for proposal**). The note at the bottom of the save panel changes from **No hero selected.** to **Hero: \[panel name].** Click the star again to unstar it.

**3. Save the board**

Save with **Save to opportunity** or **Attach to customer**. The save confirmation includes **Set as proposal hero**.

**4. Check the proposal**

On the proposal, the **Hero attached** check is now ticked.

Which proposal gets the hero:

* If you opened Imagine from a proposal, the hero goes on **that proposal only**.
* If you opened Imagine some other way, it goes on the customer's **most recently updated draft** proposal. If the customer has no draft, the board still saves but no hero is set.

> [!WARNING]
>
> Only **draft** proposals can take a new hero. If the proposal you came from is no longer a draft (for example it's ready or sent), you'll see **"That proposal is no longer a draft. Nothing was saved."** and nothing is saved. Make a revision or start from a draft instead.

Other messages you might see:

* **"Pick a customer before saving to the customer or opportunity."** Imagine needs a customer to save a starred panel. Open it from the customer or proposal.
* **"That proposal wasn't found for this customer. Nothing was saved."** The proposal belongs to someone else or was removed. Open Imagine again from the right proposal.
* **"Your role can't set a proposal hero."** Your role can't edit proposals.

See [Proposals](https://help.yournewdoor.com/guides/proposals.md) for the rest of the readiness checklist.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.