> ## Documentation Index
> Fetch the complete documentation index at: https://help.yournewdoor.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Hardware catalog (Emtek)

> Add Emtek entry hardware to an estimate and search Emtek SKUs on proposals and invoices.

The Hardware step lets you add Emtek entry hardware (handlesets, deadbolts, pulls and accessories) to an estimate while you build it with the customer. You pick a product, choose its configuration, finish and any approved upgrades, and Field Ops prices it for you.

Field Ops also has the full Emtek vendor SKU catalog. You can search it when you add lines to a proposal or invoice from the price book.

## Who can use it

* Anyone who can open the price book can browse Hardware and add it to an estimate.
* **Installers** can't open Hardware, just like the rest of the price book.
* Costs are never shown on the Hardware step. Everyone sees sell prices only.
* The line total (unit price × quantity) shows for every role that sees estimate prices. Design Concierges don't see it.

## Open the Hardware step

Hardware sits next to Products. It isn't a separate step, so the **Products** tab stays highlighted while you're on it.

You can get there three ways:

* In the **Products** step, click **Hardware** in the **Doors | Hardware** switch at the top.
* Click **Hardware** in the left sidebar. If you're working on an estimate, the customer and opportunity carry over.
* Old **Settings → Sales → Price book → Hardware** links now open the same page.

To go back to doors, click **Doors** in the same switch.

## Browse the catalog

The page is called **Entry Hardware**. It shows how many curated Emtek families are available.

* **Search:** type in **Search hardware…** to filter by name, style or description. Click the **×** to clear it.
* **Category chips:** filter by style. The chips are **All**, **Contemporary**, **Transitional**, **Traditional**, **Architectural / Rustic**, **Electronic Deadbolts**, **Mechanical Deadbolts**, **Exterior Door Pulls** and **Accessories**. You only see the chips that have products.
* **Product cards:** each card shows the style, the product name, how many configurations and finishes it has, and a **Starting at** price. A card that isn't ready to price yet shows **Configure to see price**.

## Add hardware to an estimate

**1. Open a product**

Click a product card. The configure panel opens with the product photo on the left and the options on the right.

**2. Choose the configuration**

Pick a **Configuration** (for example, Single Cylinder). Pulls and other sized items show **Size** and **Mounting** (**Standard** or **Concealed Surface**) instead.

**3. Choose a finish**

Click a finish swatch under **Finish**. The finish name shows next to the label.

**4. Add approved upgrades (optional)**

If the product has any, tick them under **Approved Upgrades** (for example, an interconnect device). The price updates.

**5. Set the quantity**

Use the **−** and **+** buttons, or type a number. **Unit price** updates on the right.

**6. Add it**

Click **+ Add to estimate**. The button changes to **✓ Added — Add another**. Click **View estimate →** to review it, or click outside the panel to keep browsing.

> [!NOTE]
>
> The price briefly shows a dash while Field Ops works it out. **+ Add to estimate** stays greyed out until a price, configuration and finish are all set.

## What you see on the estimate

On the **Estimate** step, each hardware item gets its own line:

* **Title:** the product name, with "×2" (and so on) when the quantity is more than one.
* **Subtitle:** Emtek · the SKU · finish · upgrades.
* **Price:** the line total if you can see totals, otherwise the unit price.

The estimate summary has a **Hardware** row that adds up all the hardware lines.

### SKUs

When you add an item, Field Ops attaches the exact Emtek SKU for that configuration and finish if it has one. If not, it uses a matching orderable Emtek SKU. You're always charged the price you saw in the panel.

If no SKU matches yet, the line is still saved at the price you saw. On the job page and in the proposal line editor it shows **Exact SKU to be assigned** in place of a SKU. That isn't an error. The line isn't flagged as missing from the price book, and the exact SKU gets assigned before ordering.

## Product photos

Some selections don't have their own photo yet. Then the panel shows the family photo with a caption such as *"No photo yet for Single Cylinder · Oil-Rubbed Bronze. Showing this family's representative image — your selection above is what will be ordered."* What's ordered is always what you selected, not what's in the photo.

## Made-to-order pricing

Every configure panel shows this note, which you can share with the customer:

> Emtek Made-to-Order Hardware: the price shown reflects the selected standard configuration. Adding mortise operation, electronic access, premium finishes, or interior trim may adjust the final hardware price. Any change is presented for approval before ordering.

## Search Emtek SKUs on proposals and invoices

The **price book picker** in the proposal and invoice line editors now also searches the Emtek vendor catalog.

**1. Open the picker**

In a proposal or invoice, open the price book picker to add a line.

**2. Search**

Leave the category on **All** or choose **Hardware**, then type at least 2 characters (a product name or SKU).

**3. Pick a SKU**

Matching Emtek SKUs appear next to your regular price book items, up to 50 at a time. Select one to add it.

> [!TIP]
>
> You'll see call-for-price items in the results, but you can't pick them. If you don't see what you need, type more of the name or SKU to narrow the list.

## Good to know

* Hardware is **Emtek only**.
* If you add the same product with the same configuration, finish and upgrades again, Field Ops raises the quantity on the existing line. It doesn't add a second line.
* There's no screen for editing hardware products or prices in this release. If a product, finish or price looks wrong, tell an admin.
* **Clear estimate** empties the whole cart, hardware lines included.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.