Skip to main content
Field Ops connects to the RingCentral phone system for call history, recordings and an in-app phone.
If RingCentral isn’t connected yet, you’ll see plain empty states (for example the phone system “isn’t connected yet”) instead of errors.

Call history

The Calls desk (/desk/calls) lists calls, inbound and outbound. Calls also show on the customer page, the booking and the job.
  • Columns include the caller, Called number, the result, and length.
  • Missed or unanswered calls show an empty length.
  • Outbound calls to a number that doesn’t match a customer show the caller as Unknown.
  • Call rows have a little more space at the top so the caller phone isn’t tight against the border.

Source and campaign

For inbound calls, the Source · campaign column shows where the call came from. Outbound calls leave this column blank, and the number you called shows in Called number.

Date range

Pick a date range with the same date picker used in Reporting (for example Last 30 days, quarter to date, All time, or a custom range). Calls no longer uses the old All time / Last 7 days / Last 30 days cycle chip. The Calls picker does not show Compare vs previous; that stays on Reporting. Use the search box on Calls to find calls across the whole selected date range, not only the page currently loaded. Search matches:
  • Phone number (any format)
  • Contact name
  • Called number
  • Source and campaign
  • Time and length
  • AI summary and transcript

Number, Source and Contact filters

The Number, Source and Contact dropdowns on Calls also look across the whole selected date range, not only the calls already loaded on screen. So a number, source or contact that only shows up later in the range now appears when you pick it.
  • The filters combine with search and the date picker. Picking All or Any adds no filter.
  • Each dropdown lists the numbers, sources and contacts that exist in your selected date range, search and role scope (the other dropdowns don’t narrow these lists).
  • Your choices stay in the page address, so you can reload or share the link and land on the same filtered view.
  • A very wide range such as All time can take a moment longer to load the dropdown choices.
Everyone who can open Calls gets the same search, filter and date controls. Your role still limits which calls you see (for example, a door expert’s outbound calls stay limited to their own extension).

Listen to recordings

Recordings play inside Field Ops for people allowed to listen: admins, the Owner, managers and executives. CSRs can only play recordings of inbound calls they were on, plus stored ServiceTitan call recordings. Installers and techs never see call recordings. The same people see the AI summary text; others don’t get the summary or the audio.
Stored recordings play from Field Ops itself.

On the Calls desk

Every call card on Calls (desktop and mobile) shows the same recording block plus an AI summary box. There is no separate link or new tab: play, pause, seek and speed stay on the card. Under the player, the AI summary box shows: The summary never blocks playback. If summarizing fails, you can still listen when the recording is ready. Only people allowed to listen see processing or error states; others still do not see that a recording exists.

Transcript

Once Field Ops has the recording stored it writes the summary and a transcript automatically after the call. When a transcript exists, a Transcript line appears under the written summary. Click it to expand the full text (it scrolls if the call was long) and click again to collapse it. If there’s no transcript yet, the line doesn’t show.
  • The summary and transcript show the same way on the Calls desk and in the customer flyout.
  • If a live transcript was already saved for the call, Field Ops keeps it and only fills in the summary.
  • Calls recorded in the app get a summary and transcript too, even when the RingCentral recording sync is turned off, so they aren’t left stuck on pending.

Calls and open opportunities

When a call matches a customer, Field Ops links that call to the customer’s newest open opportunity behind the scenes, so the call and its summary can be pulled up with that opportunity later. There’s nothing new to click for this yet; an opportunity summary panel that shows these calls is coming in a later update.

On the customer, booking and job

You can also play a recording from:
  • The Calls card on the customer page. It lists up to the 50 most recent calls with that customer, each with a Play recording button when a recording is ready.
  • The Calls section on the booking and the job.
Press Play recording to listen right on the page, and drag the bar to skip ahead.
Field Ops goes back and fetches recordings for older calls that were stuck on “processing,” a batch at a time. If a call you expected to have a recording still says processing, give it a little while and check again.

ServiceTitan call recordings

Past calls from ServiceTitan can play in Field Ops once a copy of the audio has been saved in Field Ops. They show up like any other call: on the Calls card on the customer page, in the Calls section on the job (and booking), and on the Calls desk.
  • Label: the player is labeled ServiceTitan recording.
  • Who can listen: the same people who can listen to other recordings (admins, the Owner, managers and executives), plus CSRs. A CSR doesn’t need a RingCentral extension or to have been on the call to play a stored ServiceTitan recording. Other office roles still can’t play it, and installers and techs never see call recordings.
  • Doesn’t expire: because the copy lives in Field Ops, a stored ServiceTitan recording never shows Recording expired, even after ServiceTitan’s own 90-day link runs out. RingCentral recordings still follow the 90-day rule.
  • Only once it’s stored: a ServiceTitan call plays only after its audio file is saved in Field Ops. Until then there’s nothing to play.
  • Which recording plays: if the same call also has an in-app or phone system recording, that one plays first. The ServiceTitan copy plays only when neither of the others is stored.
  • No automatic AI summary or transcript: Field Ops doesn’t auto-summarize or transcribe ServiceTitan recordings, so the AI summary box stays hidden for them unless a summary already exists.
Each ServiceTitan call row can also show: Call times show in your profile timezone, like everywhere else in Field Ops.

In-app phone

The in-app phone is on for office roles. Each person signs in to RingCentral in the phone bar.
The RingCentral phone sits at the bottom of the screen. Minimize or expand it; Field Ops remembers your choice per screen size. On desktop it starts minimized on your first visit.

Linking staff to RingCentral

Admins link each user to their RingCentral extension under Settings → Company → Users. In Add user, the picker lists all RingCentral extensions (search by name, extension or direct number).
If you see “RingCentral app needs ReadAccounts to list all extensions.”, the RingCentral app needs one more permission before the full list appears. Until then, only your own extension shows.

Numbers

The Numbers desk lists the company’s phone numbers. If something fails you’ll see “Couldn’t confirm number. Try again.” or “Couldn’t save changes. Try again.”
Last modified on November 13, 2026