Skip to main content
When a customer says yes to a replacement, their job needs a site assessment before anything else happens. This page walks through booking it and answers the questions dispatch asks most. Repair jobs skip the site assessment and go straight to Pre-job. Roles change what you can do, not what the screens look like.

1. Find the sold customer

A sold customer lands in the Needs site assessment queue on Schedule on their own. You don’t have to add them.
  • The job joins the queue as soon as the customer accepts the estimate or proposal, or pays the $99 reservation, whichever comes first.
  • Repair jobs never join the queue. When a repair is sold or its deposit is paid, the job goes to Pre-job instead. If a job is the wrong type, change it on the job page and Field Ops moves it in or out of the queue. See Change a job’s type.
  • Each customer has one job, so they show once even if they did both.
  • If the customer signed before they had a service address, the job can’t be made yet, so they aren’t in the queue. Add their address with Edit customer details. When the customer has no job yet, saving the address creates the job and puts them in the queue.
  • The job leaves the queue when its site assessment is booked, or when the job moves past site assessment, is completed or is cancelled.
  • Jobs on hold don’t show in the queue.
The queue is the Needs site assessment list beside the calendar on Schedule. Needs assessment in the Bookings menu opens Schedule with the list open.

2. Book the site assessment

You can start from either place. On Schedule, the quickest way is to drag the job onto an installer’s time.
1

Open the customer

Search for the customer and open their customer page.
2

Use the + menu

Select +, then Book site assessment. It shows when the customer has a job that isn’t cancelled.
3

Book it

Schedule opens with this customer’s job already picked in the Needs site assessment list. Click an installer’s open time to book it, or click Book on the card and fill in the dialog as described below.
In the dialog:
  • Time. Use a quick pick (seven 2-hour windows from 9-11 AM to 3-5 PM CT, the same as installs) or set your own Date, Start and End. Visits must be between 7:00 AM and 8:00 PM CT, can’t be in the past, and must be under 4 hours.
  • Assessor. Pick who goes. See who you can assign.
  • More installers (optional). Tap anyone else who should go with the assessor. See Send more than one installer.
  • Notes (optional). Anything the assessor needs to know before they arrive, such as gate codes, which doors, or what the customer asked about. These notes show on the job’s Site assessment section.
  • If the time overlaps something already on that person’s calendar, you’ll get a soft warning. Choose Save anyway to keep it.
Once it’s saved, the visit shows on the calendar as a Site assessment and the job leaves the queue.

Who can book

Only dispatchers, managers, executives, admins and owners can book or change a site assessment, from the queue or from the customer page. Everyone else who can open Schedule, such as CSRs and Door Experts, sees the queue read-only.

3. Pick who goes

Site assessments are installers only. The Assessor list shows active installers from every market, and nobody else.
  • Installers from every market show in the list. A Houston installer can assess a Dallas job.
  • Each name shows the person’s role and market, for example Installer · Dallas. The market is the one picked when they were invited. If Field Ops doesn’t know someone’s market, you see only Installer.
  • Installers show even if they haven’t signed in yet. Someone who hasn’t accepted their invite has a small Invite pending tag next to their name and “No login yet — won’t get notifications.” under it. You can still pick them. They can’t see the visit in Field Ops until they sign in, so tell them directly.
  • If the dialog opens with the customer’s Door Expert filled in, pick an installer instead. A Door Expert can’t be saved as the assessor.
  • Each person shows Open or Booked for the time you picked.
  • Door Experts, PMs, managers, dispatchers, CSRs, removed users and test accounts can’t be saved. If you try, you’ll see “Assign an assessor from the roster”. This is checked when you save, not just in the list.
If the installer you expect isn’t in the list, they have a different role or are inactive. Ask an admin to check their row in Settings → Company → Users.

Send more than one installer

A site assessment can have a crew: the assessor plus helpers on the same visit. There’s no limit on how many.
1

Open the booking dialog

Book the visit from the dialog, or open a booked visit to edit it.
2

Tap the helpers

Under More installers, tap each extra person’s name. A picked name is highlighted. Tap it again to take them off. The line under the names reads “Same visit as the assessor. Pay and site-assessment stamp stay with the lead.”
3

Save

Everyone goes on the same visit, at the same time.
  • Installers only. The row lists active installers other than the assessor. Door Experts never show. With nobody else to pick, it reads “No other installers.”
  • Overlaps are checked. Each helper is checked against their other visits, like the assessor. You get the same soft warning and can choose Save anyway.
  • Helpers stay when the time changes. Moving the visit, by editing it or dragging it, keeps the helpers on it.
  • Inactive helpers. A helper who has been deactivated shows as (name) · inactive. Tap the name to take them off. They’re also dropped when you save.
  • Dragging books the assessor only. A visit booked by dropping a job from the queue has no helpers. Open it and edit it to add them.
  • What helpers can do. Helpers see the visit on their schedule and can work its field packet like helpers on an install: photos, the site inspection form, sign-off, flags and notes. Only the assessor swipes the visit’s steps, and the pay and the assessment stay with the assessor.

Change who goes

To change who goes or when, open the appointment on Schedule and edit it, or drag it. The same roles that can book can edit.
  • The edit dialog opens on the saved visit. It shows the visit’s own time and notes, so saving a notes change alone keeps the visit at its time.
  • Notes stay unless you change them. Clearing the Notes box and saving removes the notes.
  • Changes don’t text the customer. A new time, arrival window, assessor or notes sends nothing. To send the booked text again, click Resend confirmation in the edit dialog or the visit’s menu. See Resend a site assessment confirmation.
When you pick a different assessor, the new person replaces the old one on the same visit. The previous assessor no longer has the visit. If they’re an installer, they also lose access to that customer unless they’re on one of the customer’s jobs.

4. How the assessor finds out

Field Ops doesn’t send the assessor a text, email or push alert when you book them. They see the visit in Field Ops, so let them know directly if it’s short notice. Here’s where the visit shows up for them:
  • My schedule. Bookings → My schedule (/my-schedule) lists their own appointments, including site assessments assigned to them. See My schedule. Installers don’t have My schedule, so tell an installer about their visit directly.
  • Schedule. Dispatch can find it on the team Schedule. Pick the installer’s name in the Assignee filter.
  • Customer page and job. Clicking the card opens the customer page. From there, the job’s Site assessment section shows When, Who assessed (the person you picked), whether the $99 reservation is paid, and your notes.
  • Installers. An installer who is the assessor can search for the customer and open their customer page, even before they’re on an install job for them. See Installers as assessors.
  • Recording the visit. Door Experts, PMs, dispatchers, managers, executives and admins record opening measurements in the Site assessment section and mark the result Go or No-go. Installers can’t record the result. The installer fills out the site inspection form for each door from the job’s field packet. See Fill out the site inspection form.
The customer may also get an automatic confirmation text when the visit is booked, if those texts are turned on. See Booking confirmation texts.

Installers as assessors

When an installer is the assessor on a site assessment that isn’t cancelled, they can:
  • Find the customer in search and open their customer page.
  • Open the job from their stops on Field and fill out the site inspection form. See Fill out the site inspection form.
  • Add site photos and notes for that customer with + → Add site photos & notes. See Add site photos and notes.
  • See the site photos they added themselves. Site photos other people added stay hidden unless the installer is also on one of the customer’s jobs.
They can’t record Go or No-go, see prices, or open opportunities or proposals. If you pick someone else as the assessor, the installer loses this access. The site assessment shows as one of their stops on Field. Tapping it opens the job’s field packet with a Site inspection box at the top.

5. Field crew logins

Yes, installers have their own Field Ops logins. There is no separate “technician” role to pick. Field crew are added with the Installer (read-only) role.
1

Invite them

An Admin or the Owner goes to Settings → Company → Users, selects Invite user, enters the person’s email and picks Installer (read-only) as the role. Field Ops emails them a set-your-password invite. See Invite a user.
2

They accept

They open the invite and sign in or create their account with the same email. If they never finished the invite page, they can use Email me a sign-in link or Forgot password on the sign-in page. See Finish your invite from the sign-in page.
Once they’re in, installers land on the field view. They see the field packet only for jobs they’re on: as the lead or a helper on an install, or as the assessor or a helper on a site assessment. They can open a customer’s page when they’re assigned to a job for that customer or are the assessor on that customer’s site assessment. They don’t see sold prices.

FAQ

Open the customer’s page and use + → Book site assessment, or find them in the Needs site assessment queue on Schedule. See Book the site assessment. If they aren’t in the queue, check that the job isn’t on hold, cancelled or already booked, and that the customer has a service address.
You pick the Assessor in the booking dialog. The list has active installers from every market, and only installers. Installers show even before they’ve signed in, with an Invite pending tag. See Pick who goes.
It shows on their My schedule and on the job’s Site assessment section, along with your notes. Field Ops doesn’t text or email them about it, so tell them if it’s short notice. See How the assessor finds out.
Yes. Installers sign in to Field Ops with the Installer (read-only) role, invited from Settings → Company → Users by an Admin or the Owner. They work install jobs assigned to them and can be picked as the assessor on site assessments. See Field crew logins.

Schedule

The team calendar, the Needs site assessment queue and My schedule.

Sold to complete

The whole path from sold to a finished install.

Customer page

The + menu and what each role sees.

Users and invites

Invite people and pick their role.
Last modified on November 17, 2026