Skip to main content
The field packet is the installer’s job surface (PWA). Office assigns; field completes.

What installers do

1

Open today’s packet

After magic-link login, open Field and tap one of your stops on the map or in the list to open its job packet. It opens on 01 · Summary.
2

On my way, then Start

On Summary, swipe “Swipe: On my way” when you leave. You stay on Summary and the track then reads “Swipe: Start”. Swipe it when you arrive: that records Start and takes you to 02 · Before Photos. If you come back to Summary later, the track reads “Swipe: Before Photos →” and only moves you forward.
3

Take the before photos

Fill the four photo slots on Before Photos, then swipe Before photos done.
4

Do the work on Job details

On 03 · Job details and services, check the sold scope and swipe each step as you finish it: Remove old door, Install frame and door, then Hardware and seal.
5

Take the after photos

Fill the four photo slots on 04 · After photos, then swipe After photos done.
6

Sign off on Ending

On 05 · Ending Summary and Notes, check what was done, then get the installer and customer sign-offs. Swipe to Finish Job.
7

Take payment and complete

On 06 · Finish Job, take payment if anything is due, swipe Payment, then swipe Complete.
The hold panel, Report a problem, sign-off, Complete, Record payment and Text pay link are also on Summary. While a job is on hold, Summary says “This job is on hold. Resume it to sign off or flag a problem.” and Record payment and Text pay link are hidden until the job is resumed. File a field exception when the site doesn’t match the sold scope.

Field home (/field)

Installers now get the same Field map screen as the office: the map, the stop list, Today / Week, and previous / Today / next to change days. Week shows Monday to Sunday. The header shows the day and your market, for example “Fri, Oct 30 · Dallas”.
  • Your stops show with full details. Tap one to open its job packet (/field/[id]).
  • Other installers’ stops in your market show as pins with only the city and time. They have no customer, job number or address, and you can’t open them. They sit at the center of the market, not at the real house.
  • Texts (company line) appears at the top when the shared company text line is on.
If your profile has no market set, the map is empty: no pins (not even your own), no other installers’ stops, and the header shows a dash where the market name goes. Ask an admin to set your market.

Money on the packet

The packet uses the admin layout for every role. Next to the job status there’s always a sold-price spot: In the Site assessment panel, every role (admins included) sees Reservation paid with no dollar amount.

Only your own jobs

Installers can only open the packet for jobs they’re on: as the lead installer, or as a helper the office added under More installers on an install or a site assessment. See Add more installers. Helpers see the job on Field home and on My schedule. Opening the customer’s page stays with the lead. Admins have one exception to all of this, for testing: see Admin test mode.

Admin test mode

Admins can walk the whole installer flow at ops.yournewdoor.com/field/<job id> as a test, on any job, assigned to them or not.
Only the admin role gets test mode. Managers, PMs, dispatchers, CSRs, executives and the Owner still can’t advance a job from the field. Installers haven’t changed: only the lead installer can advance their job.
Test mode is not a sandbox. Every swipe changes the real job’s status and step, and it shows in the job’s History. Use a test job, never a live customer job.

How you can tell it’s a test

  • Banner on every screen. The swipe panel on all six screens starts with an Admin test mode strip: “You are walking the installer flow as a test. Swiping here changes the real job status and step — it is not a sandbox.”
  • Every step asks first. Installers only get a confirm before Complete. In test mode, every swipe that records a step asks first: Run “(step name)” as a test? with “Test mode. This writes Step (number) (step name) to the real job and the job history.” Tap Yes, run (step name) (test) to go ahead, or Cancel.
  • Complete asks too. At the end you see Complete this job as a test? It warns that this marks a real customer job complete and that Complete can’t be undone. The button says Yes, complete (test).
  • History marks it. Each step (and any undo) you record in test mode is saved in the job history as an admin test, so nobody mistakes it for an installer finishing the job.
1

Pick a test job

Open a test job’s packet at ops.yournewdoor.com/field/<job id> while signed in as an admin. It opens on 01 · Summary with the Admin test mode strip on the swipe panel.
2

Swipe through the screens

Swipe as an installer would and confirm each step when asked. Holds still apply: if the job is on hold, the swipe stays locked until it’s resumed.
3

Handle payment yourself

Step 8 (payment) is the one step test mode won’t do for you. See below.

Payment (Step 8) isn’t part of the test

Recording a payment would be a real charge on a real customer invoice, so admins don’t get Record payment in test mode. Instead, once the job reaches step 7 (so payment is next) and while it’s at step 8, Summary and Finish Job show a notice titled Admin test mode · Step 8 is not self-serve:
Recording a payment would be a real charge on a real customer invoice, so this walkthrough stops at Step 8. If the invoice is already paid, Step 8 still works from here. Otherwise take the payment in Payments, then come back and finish the walkthrough.

The six job screens

The job packet is six screens, in this order. You move through a job with one swipe at a time, and each of the nine job steps is saved on the job and shows in the office History with its time (CT). Only the lead installer swipes the steps. Helpers can add photos and sign off. Every screen has the same header: Back on the left, the screen number and name with the job number in the middle, and a Job options (•••) button on the right.

How moving between screens works

  • The swipe is the only way forward. There’s no Continue button.
  • A swipe with an action name (like Swipe: On my way) records that step with its time (CT). When it’s the last step on that screen, the same swipe takes you to the next screen.
  • A swipe with a screen name and an arrow (like Swipe: Before Photos →) only moves you to the next screen. It records nothing. It’s a shade lighter so you can tell the two apart.
  • Back only changes the screen. It never records or undoes a step. On Summary, Back takes you to My jobs.
  • Going back to a screen whose steps are already done never records them twice.

01 · Summary

Summary is the job’s home screen. It has two swipes:
  1. “Swipe: On my way” records step 1. You stay on Summary.
  2. “Swipe: Start” records step 2 and moves you to Before Photos in the same swipe.
Once both steps are recorded, the Summary track reads “Swipe: Before Photos →”. That swipe records nothing; it only moves you to Before Photos when you come back to Summary. A This screen’s steps list shows each step on the screen with its time (CT), or Open if it isn’t done yet. Summary also holds sold scope, notes and history, the hold panel (put the job on hold with a reason and a follow-up date; while held it shows the reason, follow-up date, when it was paused and any hold photos), installer and customer sign-off, flag exception, Record payment and Text pay link, and the Start / Complete buttons. Only the lead installer can start the job; admins, PMs and the Owner can start it on the installer’s behalf with a reason. Summary shows every photo already on the job, but you add new photos on Before Photos.
The customer’s phone number now shows only the last four digits (for example ••• 1234). Tapping it still calls the full number.

02 · Before Photos

Before Photos has four named photo slots: Before, Detail, Wide shot and House number. Tap an empty slot (it says Tap to add) to take or pick a photo for it. Each slot shows Added or Not yet. Once a photo saves, its slot shows the photo itself as a thumbnail with a ✓ Added strip, so you can see at a glance which slots are done. The strip shows right away, even while the picture is still loading on a slow connection. Every role sees the same thing.
Tapping a filled slot again doesn’t replace its photo yet. It adds a second photo with the same name, so only do that if you mean to add another. Replacing a single slot’s photo is coming in a later update.
Below the slots is the same bulk uploader as before, with the Before / During / After / Site assessment picker, so you can still add several photos at once. The Swipe: Before photos done track stays grey until there are four before photos, and the line under it says how many are missing (for example “Add 2 more photos to swipe on.”). Swiping records step 3 and moves you to screen 03.

03 · Job details and services

Job details shows the sold scope you work from: each sold line with its opening and options, any Customer conditions, and Site assessment notes when there are any. There are no prices on this screen. If nothing was sold yet, it says “No sold lines on this job yet.” It has three swipes, one per step, each saved with its own time (CT):
  1. “Swipe: Remove old door” records step 4.
  2. “Swipe: Install frame and door” records step 5.
  3. “Swipe: Hardware and seal” records step 6 and moves you to After photos.
If something is wrong, the line “Something wrong? Report a problem from Summary.” links back to Summary, where Report a problem lives.

04 · After photos

After photos works like Before Photos, with four named slots: Installed, Detail, Inside and House number. Each slot shows Added or Not yet, and the bulk uploader is below the slots. The Swipe: After photos done track stays grey until there are four after photos, and the line under it says how many are missing. Swiping records step 7 and moves you to Ending Summary and Notes.

05 · Ending Summary and Notes

Ending is where you check the job and get it signed off. It shows:
  • Ending summary: steps 1 to 7 with the time each was recorded, or Open if it isn’t done.
  • The photo counts, for example “Before photos: 4 · After photos: 4”.
  • Notes for the office, when the job has notes.
  • Sign-off: the same installer and customer sign-off as on Summary.
Until both sign-offs are in, the line under the swipe says “Sign off below, then swipe to Finish Job.” The swipe on this screen, “Swipe: Finish Job →”, only moves you to Finish Job. It records nothing.

06 · Finish Job

Finish Job has the payment box from Summary and two separate swipes:
  1. “Swipe: Payment” records step 8. You stay on Finish Job.
  2. “Swipe: Complete” records step 9 and completes the job.
Amounts stay off this screen. A line at the bottom shows which sign-offs are done, for example “Sign-offs: installer done · customer open. Use Ending or Summary if either is still open.” Payment can be swiped when every invoice on the job is paid. Complete needs both sign-offs and nothing left to pay. When a swipe is locked, the screen tells you why: If the job was unsold, Finish Job shows the unsold notice and no payment can be taken. See Take a payment.

Job options (•••)

Job options only tells you where things are: putting a job on hold and reporting a problem are on Summary, next to sign-off. If something has to stop right now, do it from Summary and call the office. A dot on the ••• button means the job is on hold.

Site assessment

The packet includes a Site assessment panel for recording opening measurements and a link to open the address in Maps. Photos, including the bulk uploader, are added on Before Photos. The assessment result is recorded as Go or No-go. Go moves the job to Pre-job; No-go puts it on hold. On a job with a site assessment that isn’t cancelled, or one that already has a site inspection draft or saved form, a Site inspection box sits at the top of the packet. Open site inspection walks each door with Back and Next, saves a draft as you go, and saves the answers on the job when you tap Complete. If you left partway, the button reads Continue site inspection. Go or No-go isn’t part of that form. See Fill out the site inspection form.

Take a payment

On Summary, Record payment and Text pay link let you collect cash or a check, or text the customer their pay link to pay by card. The lead installer can use it, and so can a crew helper on a visit for this job that is today (CT) or in progress. A visit that is cancelled, completed or a no-show doesn’t count.
1

Record cash or a check

Tap Record payment and enter the payment. Cards aren’t recorded in the field: the panel says “Run cards through Text pay link — the customer pays on the secure pay page.”
2

Or text the pay link for a card

Tap Text pay link. The panel says “Sends a fixed pay-link text to the customer. No amount and no link are shown here.” The message is fixed: “Hi — this is Your New Door. Your invoice is ready to pay securely:”, followed by the secure link and the opt-out line, which are added when it sends. Field Ops picks the customer’s first phone that hasn’t replied STOP. Tap Send text.
You never see the amount due, the link itself or the customer’s phone numbers, and you can’t copy the link. If you need a copy, ask the office. A sold job gets its invoice on its own when the proposal is signed, so you can usually collect at the door. See Invoice on a sold job.

When there’s nothing to collect

Summary shows a Take payment box that tells you why: While the job is on hold, these buttons are hidden until the job is resumed.

When it doesn’t work

Office view after field activity

Job shows complete on the Jobs desk; packet artifacts remain for QC.
Sandbox: Acting as an installer (e.g. demo tech) to rehearse packet completion before production roster invites.

Boundaries

Dispatch map

How the job got on today’s truck.

Sold to complete

Full pipeline context.
Last modified on November 17, 2026