Skip to main content
On the Products step you can line up to three doors side by side for the selected opening, so the customer can see the differences before you pick one.
1

Tick Compare on a door card

Select the opening first, then tick Compare in the bottom-left corner of a door’s picture. A Compare tray appears above the doors showing Compare 1 / 3 and This opening only, with a small picture, name and price for each door you picked.
2

Add up to three doors

Once three doors are in the tray, the other Compare boxes are turned off until you remove one. Use the × next to a door in the tray to take it out, or Clear to empty the tray.
3

Click Compare doors

Compare doors opens the Side-by-side comparison page.
Each opening has its own tray, so doors you’re comparing for Opening 1 don’t show up when you switch to Opening 2. The tray is remembered in your browser tab while you work. Compare isn’t available in the Casing lane.

The side-by-side page

Each door gets its own column with:
  • The door picture with its product line (for example YND Signature Series) in the corner.
  • The door name, its Starting from price, and a note that the price is for the slab only, with jambs and install extra.
  • A Financing box showing the lowest monthly payment, the number of months, and that it’s 0% interest.
  • The SKU, plus line, category, glass type and construction when the price book has them.
  • An Add to opening button.
Below the columns, Features & benefits (“What you get with each door”) shows a check-or-X grid of 10 features: solid hardwood, Energy Star, Low-E glass, impact-rated options, sound dampening, custom sizing, extended warranty, white-glove installation, smart-lock ready and lifetime finish protection. Each door shows how many of the 10 it includes, and the door with the most gets a Most features badge. The grid only appears when you’re comparing two or three doors, and you can hide it with the − button. When prices are visible, doors in the grid are sorted from lowest to highest price. Product Guide at the bottom opens each door’s product guide text side by side. If a door doesn’t have one, it says No product guide is attached to this SKU yet. Use × on a column to drop that door, Clear all to start over, or ← Back to Price Book to return to the estimate.
Features are based on the door’s product line (Premium Wood, Signature Series or ValueSeries). Doors outside those lines, like sidelites, show an X on every row.

Add a door from the compare page

Click Add to opening under the door you want. It goes on the opening you were comparing for, at its price book price, and you’ll see Added to opening.
  • Already added means that door is already on this opening. The same door can still go on a different opening.
  • Select an opening before adding a door. means the compare page wasn’t opened from an opening. Go back to the price book, select the opening, and open Compare again.
  • Open this estimate from a customer to add doors. means the estimate isn’t tied to a customer yet.
  • This door has no sell price yet. means the door can’t be added until it has a price in the price book.
  • You can’t add doors with this role. means your role isn’t allowed to add doors to estimates.
If your role doesn’t see prices, the compare tray and side-by-side page show that the price is hidden instead of a number, and the features grid keeps the doors in the order you picked them.

Next

Publish the proposal from step 4

Publish from step 4, or approve without sending on a phone close.

Price book: all tasks

Every task for this area.
Last modified on November 10, 2026