- Opening 1 is ready when you start, so you can add items right away.
- Each row shows a picture of the chosen door, the opening’s number and name, its configuration and size (or Config & size not set), and the chosen door with its price (or Not selected). Until a door is picked, the picture spot shows a plain gray tile.
- Click + Add opening to add another. An estimate can have up to 20 openings.
- Use an opening’s ⋮ menu to Rename, Move up, Move down or Delete it.
- Grand total at the bottom adds up every opening.
+ Add opening stays on screen
On the Products, Hardware, Labor, Necessary components and Estimate steps, + Add opening and the Grand total stay pinned to the bottom of the Openings panel, so you never have to scroll to the end of the catalog to reach them.- The catalog scrolls on its own, next to the panel. The page itself doesn’t scroll.
- A long list of openings scrolls inside the panel, above + Add opening.
- On the Estimate step, the photos, notices and step tabs scroll with the catalog, so they never push + Add opening off screen.
- On a phone, the Openings panel sits above the catalog at a fixed height, with + Add opening at its bottom.
- When you print, the whole page prints as usual.
Opening blocks on the Estimate step
On the Estimate step, each opening gets its own block. The heading shows the opening’s number and name, and its Opening subtotal on the right. Inside, lines are sorted into six sections, always in this order:
A section with nothing in it still shows, with a short note such as No doors sent to this opening yet. or No install labor on this opening. Each section has a link to fill it in, like Pick doors →, Add labor → or Add hardware → (it reads Add / change doors → or Edit labor → once there are lines). The link selects that opening and jumps you to the right step, so whatever you add lands on it.
The footer of each block breaks the opening down by Door, Inserts & components, Labor, Finishing, Hardware & trim, Components and, when there are any, Repair, followed by the opening’s total.
If your role can’t see prices, every block keeps the same layout, and the amounts show Hidden for your role instead of a number.
Change quantity on catalog lines
Every priced catalog line you add on the door-expert estimate (/catalog/pricebook/estimate) has + and − quantity controls. Quantity moves in half-steps, so you can set values like 0.5, 1, 1.5 or 2.5.
This applies to:
- Doors
- Labor
- Jamb kits, paint and other necessary-component lines
- Adding the same door (or the same catalog item) again bumps that line’s quantity instead of creating a second line.
- Adding two different doors keeps both lines on the estimate, and both count toward the total.
- The line total is unit price × quantity. The Grand total, opening subtotals and price sidebar all update as you change quantity.
- Quantities save with the estimate version and show on the customer proposal with the same fractional qty.
Gray out a line
Every line in an opening block has a Gray out button. Graying a line out keeps it on the estimate so the customer can still see it, but drops it from every total. The row fades, its name is struck through, and the button changes to Count it. Click Count it to put the line back in the total. Grayed-out lines are saved with the estimate, so they stay grayed out when you reopen it. They’re left out of the opening subtotal, the Grand total, the price sidebar, the estimate totals in the Sales Kanban flyout and the published proposal, so all of those show the same number. Gray out is also how you drop an unused door option from the total when more than one door is on the opening. Both doors stay visible; only a grayed-out door is left out of the money.Pick the opening photo door
When you’ve added more than one door to the same opening (for example after comparing doors), each door row in the Doors section gets a round selector. The door you select is the one used for the opening’s photo and highlight. every non-grayed-out door still counts toward the total. The selector doesn’t remove other doors from the money. Use Gray out a line to leave an unused option out of the total. Click another door’s selector to switch which door is highlighted for the opening photo. Older estimates that have several doors and no door picked start with the first door selected.This opening total
The price sidebar on the right stays in view as you scroll. At the top it shows This opening, with the selected opening’s name and its total, so you can see what the current opening costs while you work. Below that are the estimate total and the payment options. Grayed-out lines aren’t counted anywhere in the sidebar. If your role can’t see prices, the amounts show Hidden for your role. Each line has a small picture next to it: doors and hardware show their product photo, while labor, components, repairs and anything without a catalog photo show a plain gray tile. To fix a line that landed on the wrong opening, use its Move… menu. Lines without an opening show under Unassigned, and each one has a Pick opening… menu so you can put it on the right opening. If the estimate has two or more openings, you’ll need to assign those before you can publish. Your openings are saved with the opportunity, so they’re still there when you come back. If a save fails, you’ll see Couldn’t save openings. Try again.The Openings panel doesn’t appear in the repair lane.
Next
Add manual lines and hardware add-ons
Add a line that isn’t in the price book, or a hardware add-on.
Price book: all tasks
Every task for this area.
